NEED TEN? OR A HUNDRED?
When you need a batch of a part, upload the CAD once and set the quantity. The lab builds the run with 3D printing or CNC machining. FDM and SLA runs of up to 25 parts and $500 are priced instantly from STL or OBJ. Larger runs, and CNC runs, are priced by hand before work starts. Order what you need now and re-run the same job when you need more.
WHAT LEAVES THE LAB
- Up to 100 parts per job from one CAD file
- 3D printing and CNC machining
- One price for the whole run
- Every part scanned before dispatch
- Tracked shipping and a saved job history
FROM FILE TO PART
- STEP 01
Upload
Send your CAD file and set the quantity. A printed run of up to 25 parts and $500 from an STL or OBJ is priced in seconds; larger runs, CNC and STEP are priced after review.
- STEP 02
Configure
Choose FDM or SLA printing, or CNC machining in aluminium or steel, plus the material and finish.
- STEP 03
Build
The lab produces the batch with status updates on your dashboard, and inspects every part before it ships.
- STEP 04
Re-order
Need more later? Run the same job again from your job history. No re-briefing a vendor.
TYPICAL JOBS
Representative examples of the parts this route suits, not customer case studies.
| Part | Process | Material | Spec | Timeline |
|---|---|---|---|---|
| Enclosure set | FDM | Nylon | 50 units | Single job |
| Mounting plates | CNC milling | Aluminium | 25 units | First article, then batch |
| Cable clips | FDM | PETG | 100 units | Repeat run |
One file, the whole run
The price scales with the quantity. Upload a CAD file, set how many you need, and the batch is priced and scheduled as one job. Every unit comes off the same file.
Prove it before you batch it
Order one or two parts first, confirm fit and function, then run the quantity. The lowest unit price is worthless if every unit carries the same mistake.
MADE TO YOUR FILE, OR WE FIX IT
If a part does not match the file and options you submitted, or arrives damaged or defective, tell us within 14 days of delivery. We remake it or refund it. A parcel lost in transit is covered the same way.
COMMON QUESTIONS
- What counts as low volume manufacturing?
- Runs too big to make by hand and too small to justify tooling. On Wyntek a single job covers 1 to 100 parts from one CAD file. For larger or recurring volumes, talk to us about an Enterprise plan.
- Can a batch use 3D printing or CNC machining?
- Yes. You choose the process when you configure the job: FDM or SLA printing, or CNC machining in aluminium or steel. FDM and SLA runs of up to 25 parts and $500 are priced instantly from STL or OBJ. Larger runs, and CNC runs, are priced by hand before work starts. Either way, one price covers the whole run.
- Can I re-order the same part later?
- Yes. Your file and job history stay on the platform, so you can run the same part again whenever you need more.
- Do I need a final design?
- You need a stable, manufacturable CAD revision. If the design is still changing daily, run single prototypes first, then order the quantity once it is locked.
READY TO SEND
THE FILE?
No account needed to see a price · STL and OBJ priced in seconds · first $10 of parts on us